Block Heaters

Dri-Block & Block Heaters

A dri-block heater provides a source of precise heating for many sensitive analytical procedures. Through choice of block, a wide variety of tubes and vessels can be accommodated in a standard unit.

 Techne Dri-Block Heaters

The Techne dri-block heater provides a safe, dry, constant temperature source in the laboratory. Techne dri-block are particularly suitable for microbiology and clinical laboratories for incubation, boiling, inactivation, wet ashing, sample concentration, enzyme analysis and many other clinical and industrial purposes. Designed for precise heating of test-tubes, microcentrifuge tubes, cuvettes and microtitre plates. Techne® Dri-Block® heaters cover the temperature range from ambient +5°C to 100°C or 200°C (depending on model) using machined aluminium alloy Dri-Block® inserts as the heat transfer medium. Independent indicator lights indicate mains power and heater action.

 Stuart SBH Block Heater Model

The Stuart range of block heaters are available in two or three block versions and dual control models, where two blocks can be held at independent temperatures. Stuart Digital models are available in 130°C or 200°C versions, with an analogue 130°C version block heater also available. For users who are looking to improve the speed of sample concentration, the Stuart sample concentrator is available, where a gas chamber delivers an inert gas into the sample tubes to reduce vapour concentration in the tube and encourage evaporation.

Model

Description

SBH130DC

Block heater, digital, dual control, 130°C

SBH200DC

Block heater, digital, dual control, 200°C

SBH130D/3

Block heater, 3 block, digital, 130°C

SBH200D/3

Block heater, 3 block, digital, 200°C

SBH130

Block Heater, 2 Block, Analogue

SBH130D

Block heater, 2 block, digital, 130°C

SBH200D

Block heater, 2 block, digital, 200°C

SHT/FLEXI2

Flexi Block lnsert, double width, beads included NEW

SHT/FLEXI3

Flexi Block lnsert, triple width, beads included NEW

 

Use the search box to narrow the results of your search. RESET to clear your search.

SKU# SBH130

Block heater analogue 130°C

 

Analogue control
Economical price
130°C maximum temperature
Hot warning light to warn that the blocks are too hot to touch
Uniform and stable temperatures

Robust construction with simple analogue setting of temperature.

The 'Hot' warning light will flash whenever the block temperature is above 50°C and will operate even when the heater is turned off so long as the unit remains connected to the mains.

Heats to 100°C in less than 12 minutes.

Supplied complete with block extraction tool but without aluminium blocks which must be ordered separately.

 

Temperature range Ambient

+8°C to 130°C

Temperature stability at 37°C

±0.1°C

Uniformity within block at 37°C

±0.1°C

Uniformity within block at 130°C

±1°C

Dimensions (w x d x h)

235 x 280 x 115mm

Net weight (without blocks)

2.1kg

Heater power

300W

Electrical supply

230V, 50Hz

 
 

Availability: IN STOCK
SKU# SBH130D

Block heater digital 130°C

 

130°C maximum temperature
Digital setting and display
Uniform and stable temperatures

Designed for the precise heating of test-tubes, micro centrifuge tubes and cuvettes and microtitre plates.

The bright, easy to read LED display facilitates very easy setting of the required temperature and also accurate monitoring of the actual temperature.

Excellent temperature stability and uniformity is maintained via sensitive electronic controls.

Heats to 100°C in less than 12 minutes.

Supplied complete with block extraction tool but without aluminium blocks which must be ordered separately.


  SBH130D
Description Block Heater, 2 block, digital
Temperature Range Ambient +8°C to 130°C
Temperature Stability at 37°C ± 0.1°C
Uniformity Within Block at 37°C ± 0.1°C
Uniformity Within Block at 130°C ± 1°C
Display Resolution 0.1°C
Dimensions (w x d x h) 235mm x 280mm x 115mm
Net Weight (no blocks) 2.3 kg
Heater Power 300W
Electrical Supply 230V, 50Hz


Availability: IN STOCK
SKU# SBH130D/3

Block heater digital 130°C three block model

 

• 130°C maximum temperature
• Three block capacity
• Digital setting and display
• Uniform and stable temperatures


Designed for the precise heating of test-tubes, micro centrifuge tubes and cuvettes and microtitre plates.

The bright, easy to read LED display facilitates very easy setting of the required temperature and also accurate monitoring of the actual temperature.

Excellent temperature stability and uniformity is maintained via sensitive electronic controls.

Heats to 100°C in less than 12 minutes.

Larger three-block model available for high throughput applications like C.O.D.

Supplied complete with block extraction tool but without aluminium blocks which must be ordered separately.
 


  SBH130D/3
Description Block Heater, 3 block, digital
Temperature Range Ambient +8°C to 130°C
Temperature Stability at 37°C ± 0.1°C
Uniformity Within Block at 37°C ± 0.1°C
Uniformity Within Block at 130°C ± 1°C
Display Resolution 0.1°C
Dimensions (w x d x h) 310mm x 280mm x 115mm
Net Weight (no blocks) 3.2 kg
Heater Power 450W
Electrical Supply 230V, 50Hz

 


Availability: IN STOCK
SKU# SBH130DC

Block heater digital 130°C dual control

 

Two blocks with independent temperature control 

130°C maximum temperature
Digital setting and display
Uniform and stable temperatures

Innovative design accommodating 2 blocks with independent temperature control allowing them to be set at different temperatures.

The two bright, easy to read LED displays facilitate very easy setting of the required temperature for each block and also allow accurate monitoring of the actual temperature. 

Unit takes up less space than two separate block heaters and is ideal for applications where samples have to be transferred between two temperatures very quickly.

Supplied complete with block extraction tool but without aluminium blocks which must be ordered separately.


  SBH130DC
Temperature range Ambient +8°C to 130°C
Temp. stability ±0.1°C
Uniformity within block at 60°C ±0.1°C
Uniformity within block at max temp. ±1°C
Display resolution 0.1°C
Dimensions (w x d x h),mm 310 x 280 x 115
Net weight (without blocks) 2.9kg
Heater power 2 x 150W
Electrical supply 230V, 50Hz
 



Availability: IN STOCK
SKU# SBH200D

Block heater digital 200°C

  • 200°C maximum temperature
  • Digital setting and display
  • Uniform and stable temperatures

Designed for the precise heating of test-tubes, micro centrifuge tubes and cuvettes and microtitre plates.

The bright, easy to read LED display facilitates very easy setting of the required temperature and also accurate monitoring of the actual temperature.

Excellent temperature stability and uniformity is maintained via sensitive electronic controls.

Heats to 100°C in less than 12 minutes.

Supplied complete with block extraction tool but without aluminium blocks which must be ordered separately.


  SBH200D
Description Block Heater, 2 block, digital
Temperature Range Ambient +8°C to 200°C
Temperature Stability at 37°C ± 0.1°C
Uniformity Within Block at 37°C ± 0.1°C
Uniformity Within Block at 130°C ± 1°C
Display Resolution 0.1°C
Dimensions (w x d x h) 235mm x 280mm x 115mm
Net Weight (no blocks) 2.3 kg
Heater Power 300W
Electrical Supply 230V, 50Hz

 

 

 


Availability: IN STOCK
SKU# SBH200D/3

Block heater digital 200°C three block model

 

• 200°C maximum temperature 
• Three block capacity
• Digital setting and display 
• Uniform and stable temperatures

Designed for the precise heating of test-tubes, micro centrifuge tubes and cuvettes and microtitre plates.

The bright, easy to read LED display facilitates very easy setting of the required temperature and also accurate monitoring of the actual temperature.

Excellent temperature stability and uniformity is maintained via sensitive electronic controls.

Heats to 100°C in less than 12 minutes.

Larger three-block model available for high throughput applications like C.O.D.

Supplied complete with block extraction tool but without aluminium blocks which must be ordered separately.
 
 

  SBH200D/3
Description Block Heater, 3 block, digital
Temperature Range Ambient +8°C to 200°C
Temperature Stability at 37°C ± 0.1°C
Uniformity Within Block at 37°C ± 0.1°C
Uniformity Within Block at 130°C ± 1°C
Display Resolution 0.1°C
Dimensions (w x d x h) 310mm x 280mm x 115mm
Net Weight (no blocks) 3.2 kg
Heater Power 450W
Electrical Supply 230V, 50Hz
 

 

Availability: IN STOCK
SKU# SBH200DC

Block heater digital 200°C dual control

Two blocks with independent temperature control 

200°C maximum temperature
Digital setting and display
Uniform and stable temperatures

Innovative design accommodating 2 blocks with independent temperature control allowing them to be set at different temperatures.

The two bright, easy to read LED displays facilitate very easy setting of the required temperature for each block and also allow accurate monitoring of the actual temperature. 

Unit takes up less space than two separate block heaters and is ideal for applications where samples have to be transferred between two temperatures very quickly.

Supplied complete with block extraction tool but without aluminium blocks which must be ordered separately.

 

  SBH200DC
Temperature range 50°C to 200°C
Temp. stability ±0.1°C
Uniformity within block at 60°C ±0.1°C
Uniformity within block at max temp. ±1°C
Display resolution 0.1°C
Dimensions (w x d x h),mm 310 x 280 x 115
Net weight (without blocks) 2.9Kg
Heater power 2 x 150W
Electrical supply 230V, 50Hz
 

 

 

 


Availability: IN STOCK
SKU# FDB02AD

Techne analogue Dri-Block heater. Ambient + 5°C to 100°C, 2 blocks (230V)

Techne's Dri-block® heaters provide a safe, dry, constant temperature source in the laboratory. The units are particularly suitable for microbiology and clinical laboratories for incubation, boiling, inactivation, wet ashing, sample concentration, enzyme analysis and many other clinical and industrial purposes.


• Very accurate temperature control
• Analogue or digital control
• Wide range of interchangeable aluminium blocks
• Blocks available as accessories for all applications - tubes, vials and microplates
• Block extraction tool is supplied, allowing blocks to be removed easily
• 3-year warranty as standard


DB-2A

• Small, light and compact footprint, economical price
• Can hold up to 2 aluminium insert blocks or one 96-well plate block
• Analogue: temperature setting is by a calibrated dial
• Temperature range from ambient to 100°C
• Fast heat-up rate: 30°C to 100°C in just 12 minutes
• Temperature stability at 40°C: ± 0.05°C

Technical Specification
 
Parameter DB-2A
Temperature range Ambient to 100°C
Maximum no. of blocks 2
Temperature stability @40°C ±0.05°C
Temperature stability @ 100°C ±0.1°C
Temperature setting Rotary graduated dial
Temperature scale graduation 2°C
Temperature display NA
Maximum variation between identical blocks @ 40°C 0.2°C
Set point accuracy ±2°C
Heat up time: 30 to 37°C 8
Heat up time: 30 to 56°C 9
Heat up time: 30 to Maximum 12
RS232 option available No
Heater power 300W
Power supply 230V 50-60 Hz
Dimensions L x W x H (mm) 202 x 260 x 105
Shipping Weight 4kg

Availability: IN STOCK
SKU# FDB02DDR

Techne's Dri-block® heaters provide a safe, dry, constant temperature source in the laboratory. The units are particularly suitable for microbiology and clinical laboratories for incubation, boiling, inactivation, wet ashing, sample concentration, enzyme analysis and many other clinical and industrial purposes.

• Very accurate temperature control
• Analogue or digital control
• Wide range of interchangeable aluminium blocks
• Blocks available as accessories for all applications - tubes, vials and microplates
• Block extraction tool is supplied, allowing blocks to be removed easily
• 3-year warranty as standard


DB-2D

• Bright orange LED digital display for fast and accurate setting of temperature
• RS232 connection available for PC control
• Can hold up to 2 aluminium insert blocks or one 96-well plate block
• Temperature range from ambient to 100°C
• Fast heat-up rate 30°C to 100°C from just 12 minutes
• Temperature stability at 40°C of less than ± 0.1°C

Technical Specification
 
Parameter DB-2D
Temperature range Ambient to 100°C
Maximum no. of blocks 2
Temperature stability @40°C ±0.05°C
Temperature stability @ 100°C ±0.1°C
Temperature setting Push Button
Temperature scale graduation No graduation
Temperature display Orange 4 digit LED
Maximum variation between identical blocks @ 40°C 0.2°C
Set point accuracy ±1°C
Heat up time: 30 to 37°C 8
Heat up time: 30 to 56°C 9
Heat up time: 30 to Maximum 12
RS232 option available Yes
Heater power 300W
Power supply 230V 50-60 Hz
Dimensions L x W x H (mm) 202 x 260 x 105
Shipping Weight 5kg
 

 


Availability: IN STOCK
SKU# FDB03OD

Techne analogue Dri-Block heater. Ambient + 5°C to 100°C, 3 blocks (230V)

Techne's Dri-block® heaters provide a safe, dry, constant temperature source in the laboratory. The units are particularly suitable for microbiology and clinical laboratories for incubation, boiling, inactivation, wet ashing, sample concentration, enzyme analysis and many other clinical and industrial purposes.


• Very accurate temperature control
• Analogue or digital control
• Wide range of interchangeable aluminium blocks
• Blocks available as accessories for all applications - tubes, vials and microplates
• Block extraction tool is supplied, allowing blocks to be removed easily
• 3-year warranty as standard

DB-3

• The DB-3 is designed to hold up to 3 aluminium insert blocks or one 96-well plate block
• Analogue: temperature setting is by a calibrated dial
• Temperature range from ambient to 100°C
• Fast heat-up rate: 30°C to 100°C in just 18 minutes
• Temperature stability at 40°C: ± 0.05°C
 
 
Technical Specification

Parameter DB-3
Temperature range Ambient to 100°C
Maximum no. of blocks 3
Temperature stability @ 40°C ±0.05°C
Temperature stability @ 100°C ±0.1°C
Temperature setting Rotary knob
Temperature scale graduation 2°C
Temperature display NA
Maximum variation between identical blocks @ 40°C 0.2°C
Set point accuracy ±2°C
Heat up time: 30 to 37°C 8
Heat up time: 30 to 56°C 12
Heat up time: 30 to Maximum 18
RS232 option available No
Heater power 450W
Power supply 230V 50-60Hz
Dimensions L x W x H (mm) 279x260x105
Shipping Weight 6kg

Availability: IN STOCK
SKU# FDB03AD

Techne analogue Dri Block heater. Ambient + 5°C to 200°C, 3 blocks (230V)

 Techne's Dri-block® heaters provide a safe, dry, constant temperature source in the laboratory. The units are particularly suitable for microbiology and clinical laboratories for incubation, boiling, inactivation, wet ashing, sample concentration, enzyme analysis and many other clinical and industrial purposes.


• Very accurate temperature control
• Analogue or digital control
• Wide range of interchangeable aluminium blocks
• Blocks available as accessories for all applications - tubes, vials and microplates
• Block extraction tool is supplied, allowing blocks to be removed easily
• 3-year warranty as standard

DB-3A

• Temperature range from ambient to 200°C for higher temperature applications
• Can hold up to 3 aluminium insert blocks or one 96-well plate block
• Analogue: temperature setting is by a calibrated dial
• Powerful heater for fast heat-up rate: 30°C to 200°C in just 30 minutes
• Temperature stability at 40°C: ±0.1°C

 
Technical Specification
 
Parameter DB-3A
Temperature range Ambient to 200°C
Maximum no. of blocks 3
Temperature stability @ 40°C ±0.1°C
Temperature stability @ 100°C ±0.15°C
Temperature setting Rotary knob
Temperature scale graduation 2°C
Temperature display NA
Maximum variation between identical blocks @ 40°C 0.2°C
Set point accuracy ±2°C
Heat up time: 30 to 37°C 8
Heat up time: 30 to 56°C 12
Heat up time: 30 to Maximum 30
RS232 option available No
Heater power 450W
Power supply 230V 50-60Hz
Dimensions L x W x H (mm) 279x260x105
Shipping Weight 6kg

Availability: IN STOCK
SKU# DB200/3

Techne Dri-Block heater. Ambient + 5°C to 200°C, 3 blocks (230V)

 Techne's Dri-block® heaters provide a safe, dry, constant temperature source in the laboratory. The units are particularly suitable for microbiology and clinical laboratories for incubation, boiling, inactivation, wet ashing, sample concentration, enzyme analysis and many other clinical and industrial purposes.


• Very accurate temperature control
• Analogue or digital control
• Wide range of interchangeable aluminium blocks
• Blocks available as accessories for all applications - tubes, vials and microplates
• Block extraction tool is supplied, allowing blocks to be removed easily
• 3-year warranty as standard


DB-3D 

• Can hold up to 3 aluminium insert blocks or one 96-well plate block
• Bright orange LED digital display for fast and accurate setting of temperature
• DB-3D temperature range from ambient to 200°C
• Powerful heater for fast heat-up rate: 30°C to 200°C in just 25 minutes
• Interchangeable insert blocks to accommodate a variety of tubes
• Temperature stability at 40°C: ± 0.1°C

Technical Specification
 

Parameter DB-3D
Temperature range Ambient to 200°C
Maximum no. of blocks 3
Temperature stability @ 40°C ±0.1°C
Temperature stability @ 100°C ±0.15°C
Temperature setting Push Button
Temperature scale graduation No graduation
Temperature display Orange 4 digit LED
Maximum variation between identical blocks @ 40°C 0.2°C
Set point accuracy ±1°C
Heat up time: 30 to 37°C 11
Heat up time: 30 to 56°C 15
Heat up time: 30 to Maximum 25
RS232 option available No
Heater power 450W
Power supply 230V 50-60Hz
Dimensions L x W x H (mm) 279x260x105
Shipping Weight 6kg 
 


Availability: IN STOCK
SKU# FDB03DDR

 Techne's Dri-block® heaters provide a safe, dry, constant temperature source in the laboratory. The units are particularly suitable for microbiology and clinical laboratories for incubation, boiling, inactivation, wet ashing, sample concentration, enzyme analysis and many other clinical and industrial purposes.


• Very accurate temperature control
• Analogue or digital control
• Wide range of interchangeable aluminium blocks
• Blocks available as accessories for all applications - tubes, vials and microplates
• Block extraction tool is supplied, allowing blocks to be removed easily
• 3-year warranty as standard

DB-3D

• Can hold up to 3 aluminium insert blocks or one 96-well plate block
• Bright orange LED digital display for fast and accurate setting of temperature
• DB-3D temperature range from ambient to 200°C
• Powerful heater for fast heat-up rate: 30°C to 200°C in just 25 minutes
• Interchangeable insert blocks to accommodate a variety of tubes
• Temperature stability at 40°C: ± 0.1°C

Technical Specification
 
Parameter DB-3D
Temperature range Ambient to 200°C
Maximum no. of blocks 3
Temperature stability @ 40°C ±0.1°C
Temperature stability @ 100°C ±0.15°C
Temperature setting Push Button
Temperature scale graduation No graduation
Temperature display Orange 4 digit LED
Maximum variation between identical blocks @ 40°C 0.2°C
Set point accuracy ±1°C
Heat up time: 30 to 37°C 11
Heat up time: 30 to 56°C 15
Heat up time: 30 to Maximum 25
RS232 option available Yes
Heater power 450W
Power supply 230V 50-60Hz
Dimensions L x W x H (mm) 279x260x105
Shipping Weight 6kg 

Availability: IN STOCK
SKU# DB100/3

echne Dri-Block heater. Ambient + 5°C to 100°C, 3 blocks (230V)

Techne's Dri-block® heaters provide a safe, dry, constant temperature source in the laboratory. The units are particularly suitable for microbiology and clinical laboratories for incubation, boiling, inactivation, wet ashing, sample concentration, enzyme analysis and many other clinical and industrial purposes.


• Very accurate temperature control
• Analogue or digital control
• Wide range of interchangeable aluminium blocks
• Blocks available as accessories for all applications - tubes, vials and microplates
• Block extraction tool is supplied, allowing blocks to be removed easily
• 3-year warranty as standard

DB-3DL


• Can hold up to 3 aluminium insert blocks or one 96-well plate block
• Bright orange LED digital display for fast and accurate setting of temperature
• DB-3DL temperature range from ambient to 100°C
• Powerful heater for fast heat-up rate: 30°C to 200°C in just 25 minutes
• Interchangeable insert blocks to accommodate a variety of tubes
• Temperature stability at 40°C: ± 0.1°C

 

Technical Specification
 
Parameter DB-3DL
Temperature range Ambient to 100°C
Maximum no. of blocks 3
Temperature stability @ 40°C ±0.1°C
Temperature stability @ 100°C ±0.15°C
Temperature setting Push Button
Temperature scale graduation No graduation
Temperature display Orange 4 digit LED
Maximum variation between identical blocks @ 40°C 0.2°C
Set point accuracy ±1°C
Heat up time: 30 to 37°C 8
Heat up time: 30 to 56°C 9
Heat up time: 30 to Maximum 12
RS232 option available No
Heater power 450W
Power supply 230V 50-60Hz
Dimensions L x W x H (mm) 279x260x105
Shipping Weight 6kg

Availability: IN STOCK
SKU# DB100/4

Techne's Dri-block® heaters provide a safe, dry, constant temperature source in the laboratory. The units are particularly suitable for microbiology and clinical laboratories for incubation, boiling, inactivation, wet ashing, sample concentration, enzyme analysis and many other clinical and industrial purposes.


• Very accurate temperature control
• Digital control
• Wide range of interchangeable aluminium blocks
• Blocks available as accessories for all applications - tubes, vials and microplates
• Block extraction tool is supplied, allowing blocks to be removed easily
• 3-year warranty as standard

DB-4D

• Can hold up to 4 aluminium insert blocks or two 96-well plate blocks
• Bright orange LED digital display for fast and accurate setting of temperature
• Temperature range from ambient to 100°C
• Powerful heater for fast heat-up rate: 30°C to 100°C in just 15 minutes
• Interchangeable insert blocks to accommodate a variety of tubes
• Temperature stability at 40°C: ±0.1°C

Technical Specification
 
Parameter DB-4D
Temperature range Ambient to 100°C
Maximum no. of blocks 4
Temperature stability at 40°C ±0.1°C
Temperature setting Push button
Temperature display Orange 4 digit LED
Maximum variation between identical blocks @ 40°C 0.2°C
Uniformity within block at 40°C ±0.1°C
Uniformity within block at 100°C ±0.1°C
Set point accuracy ±1°C
Heat up time: 30 to 37°C 13
Heat up time: 30 to 56°C 11
Heat up time: 30 to Maximum 15
RS232 option available No
Heater power 600W
Power supply 230V 50-60 Hz
Dimensions L x W x H (mm) 356 x 260 x 105
Shipping Weight 7kg
 

 


Availability: IN STOCK
SKU# DB100/2

Techne Dr Block heater. Ambient + 5°C to 100°C, 2 blocks (230V)

 

Techne's Dri-block® heaters provide a safe, dry, constant temperature source in the laboratory. The units are particularly suitable for microbiology and clinical laboratories for incubation, boiling, inactivation, wet ashing, sample concentration, enzyme analysis and many other clinical and industrial purposes.


Key Features
• Small, light, compact footprint - flat top surface allows units to be stacked in storage.
• Can hold any combination of aluminium insert blocks, depending on the model chosen.
• Digital models enable highly accurate temperature precision.
• Temperature range from ambient + 5°C to 100°C.
• Fast heat-up rate: 25°C to 100°C in 8 minutes.
• Advanced temperature control. Temperature stability at 37°C ± 0.1°C.
• Outer casing is cool to the touch, even at maximum operating temperature.
• Bright orange 5-digit LED digital display for fast and accurate setting of temperature and timer.
• Temperature range from ambient to 100°C.
• Accurate, reproducible, rapid and safe heating of your samples.
• High quality, precision-engineered blocks provide excellent thermal contact.
• Versatile range of interchangeable heating blocks to fit all popular sample tubes and plates.
• Full range of models and options for basic and advanced applications.

Electrical Safety
The Dri-Block® range has been designed to comply with all RF interference and electrical safety regulations.

Warranty
Techne® Dri-Block® heaters have earned a strong reputation for reliability. All instruments are supplied with a 3 year warranty. The anodised aluminium Dri-Block® inserts are supplied with a 1 year warranty.

Applications
Applications include incubation, boiling, inactivation, wet washing, sample concentration, enzyme digestions, enzyme activity studies, nucleic acid hybridisations and many other clinical and industrial purposes. Larger three and four-block models are available for high throughput applications such as Chemical Oxygen Demand. The innovative Techne® range also includes a twin control unit, accommodating two blocks with independent digital temperature controls. Each block can be set to different temperatures - ideal for multiple users or for applications where samples have to be transferred between two temperatures very quickly.

Countdown Timer
Each digital unit features a countdown timer, which can be adjusted to time your experiment from anywhere between 1 minute and 100 hours, in 1 minute increments. To set the timer, press and hold the timer button and press the up or down buttons. Each press of the up or down buttons will increase or decrease the set time by 1 minute. If the buttons are held down, the time change will accelerate to 200 min per second. Release the timer button to activate the timer. An audible beep will indicate the timer is active. When the count-down has completed, an audible beep will be heard and the display will alternate between END and current temperature. Press the set/reset button to cancel the beeper. The unit will cool to ambient once the count-down time has completed. To cancel the timer, press and hold the set/reset button until STOP appears and an audible beep is heard.

Over-temperature cut-out
Techne® Dri-Block® model DB100/2 has no user-adjustable cut-out. However, in the event of a fault occurring which could cause the Dri-Block® to overheat, a thermal fuse will cut in and remove power from the heater. This will occur when the temperature reaches approximately 192°C in the DB100 models.


New panel venting
Each Techne® digital Dri-Block® has venting to the side panels. Whilst helping to create a fresh modern look, the vents are designed to dissipate heat from the outer surfaces of the Dri-Block®, allowing users to safely handle and relocate their Dri-Blocks® even after extended use at 100C.
 
Technical Specification 
 

Model

DB100 / 2

Blocks 2
Display 5 character LED
Working range Ambient +5°C to 100°C
Min. set temp. 0°C
Resolution 0.1°C
Accuracy @ 37°C <±1°C
Accuracy @ 100°C <±1°C
Stability @ 37°C <±0.1°C
Stability @ 100°C <±0.15°C
Maximum variation. . . 0.2°C at 37°C
. . .within a block 0.25°C at 100°C
Maximum variation. . . 0.5°C at 37°C
. . .between blocks 0.5°C at 100°C
Heat up 25-100°C 8 minutes
Heat up 25-200°C na
Audible beeps Yes
Min. timer 1 minute
Max. timer 99hr 59min
Safety cutout Thermal fuse
Dimensions (WDH) 202 x 260 x 105mm
Electrical supply 230V or 115V 50-60Hz
Power 300W
Shipping weight 5kg
Warranty 3 years

 


Availability: IN STOCK
SKU# DB100/2TC

Techne Dri-Block heater. Ambient + 5°C to 100°C, 2 blocks twin control (230V)

 

Techne's Dri-block® heaters provide a safe, dry, constant temperature source in the laboratory. The units are particularly suitable for microbiology and clinical laboratories for incubation, boiling, inactivation, wet ashing, sample concentration, enzyme analysis and many other clinical and industrial purposes.

• Small, light, compact footprint - flat top surface allows units to be stacked in storage.
• Can hold any combination of aluminium insert blocks, depending on the model chosen.
• Digital models enable highly accurate temperature precision.
• Temperature range from ambient + 5°C to 100°C.
• Fast heat-up rate: 25°C to 100°C in 8 minutes.
• Advanced temperature control. Temperature stability at 37°C ± 0.1°C.
• Outer casing is cool to the touch, even at maximum operating temperature.
• Bright orange 5-digit LED digital display for fast and accurate setting of temperature and timer.
• Temperature range from ambient to 100°C.
• Accurate, reproducible, rapid and safe heating of your samples.
• High quality, precision-engineered blocks provide excellent thermal contact.
• Versatile range of interchangeable heating blocks to fit all popular sample tubes and plates.
• Full range of models and options for basic and advanced applications.

Electrical Safety
The Dri-Block® range has been designed to comply with all RF interference and electrical safety regulations.

Warranty
Techne® Dri-Block® heaters have earned a strong reputation for reliability. All instruments are supplied with a 3 year warranty. The anodised aluminium Dri-Block® inserts are supplied with a 1 year warranty.

Applications
Applications include incubation, boiling, inactivation, wet washing, sample concentration, enzyme digestions, enzyme activity studies, nucleic acid hybridisations and many other clinical and industrial purposes. Larger three and four-block models are available for high throughput applications such as Chemical Oxygen Demand. The innovative Techne® range also includes a twin control unit, accommodating two blocks with independent digital temperature controls. Each block can be set to different temperatures - ideal for multiple users or for applications where samples have to be transferred between two temperatures very quickly.

Countdown Timer
Each digital unit features a countdown timer, which can be adjusted to time your experiment from anywhere between 1 minute and 100 hours, in 1 minute increments. To set the timer, press and hold the timer button and press the up or down buttons. Each press of the up or down buttons will increase or decrease the set time by 1 minute. If the buttons are held down, the time change will accelerate to 200 min per second. Release the timer button to activate the timer. An audible beep will indicate the timer is active. When the count-down has completed, an audible beep will be heard and the display will alternate between END and current temperature. Press the set/reset button to cancel the beeper. The unit will cool to ambient once the count-down time has completed. To cancel the timer, press and hold the set/reset button until STOP appears and an audible beep is heard.

Over-temperature cut-out
Techne® Dri-Block® model DB100/2TC  has no user-adjustable cut-out. However, in the event of a fault occurring which could cause the Dri-Block® to overheat, a thermal fuse will cut in and remove power from the heater.

Accurate temperature control
Highly accurate digital temperature control is made quick and easy with a bright 5-digit orange LED display. Each unit has a set point resolution of 0.1°C with temperature range from ambient + 5°C up to 100°C. The Techne® Dri-Block® heaters facilitate a fast heat-up rate from 25°C to 100°C in 8 minutes, depending on the model chosen and all models are able to achieve a temperature stability at 37°C ± 0.1°C.

New panel venting
Each Techne® digital Dri-Block® has venting to the side panels. Whilst helping to create a fresh modern look, the vents are designed to dissipate heat from the outer surfaces of the Dri-Block®, allowing users to safely handle and relocate their Dri-Blocks® even after extended use at 100ËšC.

Specification

 

Model DB100 / 2TC
Blocks 2
Display 5 character LED
Working range Ambient +5°C to 100°C
Min. set temp. 0°C
Resolution 0.1°C
Accuracy @ 37°C <±1°C
Accuracy @ 100°C <±1°C
Stability @ 37°C <±0.1°C
Stability @ 100°C <±0.15°C
Maximum variation. . . 0.2°C at 37°C
. . .within a block 0.25°C at 100°C
Maximum variation. . . 0.5°C at 37°C
. . .between blocks 0.5°C at 100°C
Heat up 25-100°C 8 minutes
Heat up 25-200°C na
Audible beeps Yes
Min. timer 1 minute
Max. timer 99hr 59min
Safety cutout Thermal fuse
Dimensions (WDH) 279 x 260 x 105mm
Electrical supply 230V or 115V 50-60Hz
Power 300W
Shipping weight 5kg
Warranty 3 years

 


Availability: IN STOCK
SKU# DB200/2

Techne Dri Block heater. Ambient + 5°C to 200°C, 2 blocks (230V)

Techne's Dri-block® heaters provide a safe, dry, constant temperature source in the laboratory. The units are particularly suitable for microbiology and clinical laboratories for incubation, boiling, inactivation, wet ashing, sample concentration, enzyme analysis and many other clinical and industrial purposes.

Key Features
• Small, light, compact footprint - flat top surface allows units to be stacked in storage.
• Can hold any combination of aluminium insert blocks, depending on the model chosen.
• Digital models enable highly accurate temperature precision.
• Temperature range from ambient + 5°C to 200°C.
• Fast heat-up rate: 25°C to 100°C in 8 minutes.
• Advanced temperature control. Temperature stability at 37°C ± 0.1°C.
• Outer casing is cool to the touch, even at maximum operating temperature.
• Bright orange 5-digit LED digital display for fast and accurate setting of temperature and timer.
• Temperature range from ambient to 200°C.
• Accurate, reproducible, rapid and safe heating of your samples.
• High quality, precision-engineered blocks provide excellent thermal contact.
• Versatile range of interchangeable heating blocks to fit all popular sample tubes and plates.
• Full range of models and options for basic and advanced applications.

Electrical Safety
The Dri-Block® range has been designed to comply with all RF interference and electrical safety regulations.

Warranty
Techne® Dri-Block® heaters have earned a strong reputation for reliability. All instruments are supplied with a 3 year warranty. The anodised aluminium Dri-Block® inserts are supplied with a 1 year warranty.

Applications
Applications include incubation, boiling, inactivation, wet washing, sample concentration, enzyme digestions, enzyme activity studies, nucleic acid hybridisations and many other clinical and industrial purposes. Larger three and four-block models are available for high throughput applications such as Chemical Oxygen Demand. The innovative Techne® range also includes a twin control unit, accommodating two blocks with independent digital temperature controls. Each block can be set to different temperatures - ideal for multiple users or for applications where samples have to be transferred between two temperatures very quickly.

Countdown Timer
Each digital unit features a countdown timer, which can be adjusted to time your experiment from anywhere between 1 minute and 100 hours, in 1 minute increments. To set the timer, press and hold the timer button and press the up or down buttons. Each press of the up or down buttons will increase or decrease the set time by 1 minute. If the buttons are held down, the time change will accelerate to 200 min per second. Release the timer button to activate the timer. An audible beep will indicate the timer is active. When the count-down has completed, an audible beep will be heard and the display will alternate between END and current temperature. Press the set/reset button to cancel the beeper. The unit will cool to ambient once the count-down time has completed. To cancel the timer, press and hold the set/reset button until STOP appears and an audible beep is heard.

Over-temperature cut-out
Techne® Dri-Block® model DB200/2 ha no user-adjustable cut-out. However, in the event of a fault occurring which could cause the Dri-Block® to overheat, a thermal fuse will cut in and remove power from the heater. This will occur when the temperature reaches approximately 240°C in the DB200 model.

New panel venting
Each Techne® digital Dri-Block® has venting to the side panels. Whilst helping to create a fresh modern look, the vents are designed to dissipate heat from the outer surfaces of the Dri-Block®, allowing users to safely handle and relocate their Dri-Blocks® even after extended use at 100Ë?C or 200Ë?C.
 
 
 Technical Specification

Model DB200 / 2
Blocks 2
Display 5 character LED
Working range Ambient +5°C to 200°C
Min. set temp. 0°C
Resolution 0.1°C
Accuracy @ 37°C <±1°C
Accuracy @ 100°C <±1°C
Stability @ 37°C <±0.1°C
Stability @ 100°C <±0.15°C
Maximum variation. . . 0.2°C at 37°C
. . .within a block 0.25°C at 100°C
Maximum variation. . . 0.5°C at 37°C
. . .between blocks 0.5°C at 100°C
Heat up 25-100°C 8 minutes
Heat up 25-200°C 23 minutes
Audible beeps Yes
Min. timer 1 minute
Max. timer 99hr 59min
Safety cutout Thermal fuse
Dimensions (WDH) 202 x 260 x 105mm
Electrical supply 230V or 115V 50-60Hz
Power 300W
Shipping weight 5kg
Warranty 3 years

Availability: IN STOCK