The Paraffin Wax Dispenser provides immediate "Wax On Tap" for Pathology laboratories etc. The problem of wax solidifying at the tap is completely eliminated by the incorporation of a thermally insulated tap heater with independent temperature control. 

 The Paraffin Section Flotation Bath is designed to assist with the handling of paraffin wax samples in histology and pathology laboratories. It is essentially a hot distilled water floating out bath that allows for the meticulous manipulation and location of sections onto glass slides. 

Electrothermal Paraffin Section Flotation Bath is designed to assist with the handling of paraffin wax samples in histology and pathology laboratories. It is essentially a hot distilled water floating out bath that allows for the meticulous manipulation and location of sections onto glass slides. 

The NEW Paraffin Section Flotation bath has improved heat up times achieving a stable 45°C using 2.25 litres of water within 40 minutes. The stability and accuracy have also been improved due to the change of control which now also allows the user to set the temperature as opposed to the arbitrary power, thereby, reducing the risk of overheating sections.

The Paraffin Section Flotation Bath has a PTFE black interior and powder-coated aluminium exterior, which makes it virtually maintenance-free, extremely easy to clean and allows for improved visibility of floating sections.

If required, the lid is supplied separately as part number AZ9241.

Key Features

• New temperature control as opposed to arbitrary power control 
• Improved heat up rates 45°C nominal temperature for 2.25 litres water, attained within 40 minutes
• Improved temperature stability of ±0.5°C
• Overheating prevented with new temperature control mechanism
• PTFE black interior and powder-coated white aluminium exterior
• Virtually maintenance-free and extremely easy to clean
• Black interior provides high contrast for viewing samples

Technical Specification

The Electrothermal MH8516 Paraffin Section Mounting Bath is designed to assist with the handling of paraffin wax samples in histology and pathology laboratories. It is essentially a hot distilled water floating out bath that allows for the meticulous manipulation and location of paraffin wax sections onto glass slides. In the event of having any damaged sections or an excess of wax, both may be easily removed by skimming a filter paper across the water surface.

A white neon light indicates "Power On" and an amber neon light indicates "Heater On". The required temperature is selected using the heater dial and a nominal temperature of 70°C is typically achieved with 2 litres of water within 120 minutes.

Accurate water temperature is then maintained through an energy regulator which supplies power to a silicone rubber mat in controlled timed pulses. Over-heating of the bath is prevented by a thermal fuse within the heater mat which automatically cuts out at too high a temperature.

The Paraffin Section Mounting Bath has a PTFE black interior and powder-coated aluminium exterior, which makes it virtually maintenance-free and extremely easy to clean. It comes supplied with an IEC moulded cord and lead set and the IEC socket houses protection fuses for both the live and neutral power supply lines.

• PTFE black interior and powder-coated white aluminium exterior
• Virtually maintenance-free and extremely easy to clean
  
• Excess or damaged sections may be simply removed by skimming a filter paper over the water surface
  
• 70°C nominal temperature for 2 litres water, attained within 120 minutes
  

Technical Specification

 **LID NOT INCLUDED**

Warranty: One year parts and labour

Certification: CE

The Electrothermal MH6616 Slide Drying Bench aids in the preparation of microscope slides at the specimen mounting stage. It complements both the Paraffin Wax Dispenser and the Paraffin Wax Mounting Bath to provide a complete set of paraffin was sampling equipment for the modern laboratory.  Accepting up to 50 slides, it has the facility for drying slides in different orientations- across the drying support bars, angled from the bars, or flat without the bars.

There is an On/Off switch and "Power On" white neon and "Heater On" amber neon indicators.

The silicone rubber mat element heater provides heating up to 100°C, and the temperature is controlled from 10°C to 100°C by a built-in energy regulator.

The case and top are powder-coated aluminium and the unit comes coplete with handy carrying handles. 

• Up to 50 slides capacity
  
• The slides can be arranged on the bench in different orientations
  
• Built-in energy regulator controlling temperature up to 100°C
  
• 2 Neon indicators: Clear to indicate "Power On" and amber to indicate "Heater On"
  
• Replacement elements easy fitted by user
  

Technical Specification 

Warranty: One year parts and labour
Certification: CE