Heating Cords & Tapes

Heating Cords & Tapes

 

Electrothermal HC5 Quartz Fibre Heating Cords

The Electrothermal HC5 Quartz Fibre Heating Cords are ideal for indoor use for dry metal and glassware applications which require observation; they are especially suited to high temperature, high wattage applications.

Electrothermal HC1 Glass Fibre Heating Cords 

The Electrothermal HC1 Glass Fibre Heating Cords are ideal for indoor use for dry metal and glassware applications which require observation; they are especially suited to high temperature, high wattage applications.

Electrothermal HT7 and HT9 Glass Fibre Heating Tapes

The Electrothermal HT7 and HT9 Glass Fibre Tapes are flexible heaters that are ideal for heating columns, pipes, valves and transfer lines, especially when these applications need to be observed. They can be applied to metal pipes as well as glassware.

SKU# HC501

30.5 cm 30.5, 230V, 100W

Electrothermal Quartz Fibre Heating Cords are ideal for indoor use for dry metal and glassware applications which require observation; they are especially suited to high temperature, high wattage applications.

Electrothermal HC5 Quartz Fibre Cords have a nickel/chrome heating element wound on a quartz finbre core which is covered in a braided quartz fibre outer sheath. They are available in different lengths to accommodate a broad range of temperatures up to 800°C. As with all the tapes and cords, the use of an energy or temperature controller is recommended.

  • For high temperature, high wattage applications
  • Operational temperature range up to 800°C
  • Cord is spiralled around the tube being heated to give a surface loading power concentration up to 6.5W/cm²
  • Linear Loading: 328W/m (100W/ft)
  • Available in different lengths from 1 foot (30.5cm) to 16 feet (488cm)
  • Insulated unheated flexible lead at each end (61cm)
  • Approximate outside diameter of 5mm
  • For use in dry conditions only
  • outside diameter approx. 5mm

Availability: IN STOCK
SKU# HC504

244cm, 230V, 800W

Electrothermal Quartz Fibre Heating Cords are ideal for indoor use for dry metal and glassware applications which require observation; they are especially suited to high temperature, high wattage applications.

Electrothermal HC5 Quartz Fibre Cords have a nickel/chrome heating element wound on a quartz finbre core which is covered in a braided quartz fibre outer sheath. They are available in different lengths to accommodate a broad range of temperatures up to 800°C. As with all the tapes and cords, the use of an energy or temperature controller is recommended.

  • For high temperature, high wattage applications
  • Operational temperature range up to 800°C
  • Cord is spiralled around the tube being heated to give a surface loading power concentration up to 6.5W/cm²
  • Linear Loading: 328W/m (100W/ft)
  • Available in different lengths from 1 foot (30.5cm) to 16 feet (488cm)
  • Insulated unheated flexible lead at each end (61cm)
  • Approximate outside diameter of 5mm
  • For use in dry conditions only
  • outside diameter approx. 5mm

Availability: IN STOCK
SKU# HC503

122cm, 230V, 400W

Electrothermal Quartz Fibre Heating Cords are ideal for indoor use for dry metal and glassware applications which require observation; they are especially suited to high temperature, high wattage applications.

Electrothermal HC5 Quartz Fibre Cords have a nickel/chrome heating element wound on a quartz finbre core which is covered in a braided quartz fibre outer sheath. They are available in different lengths to accommodate a broad range of temperatures up to 800°C. As with all the tapes and cords, the use of an energy or temperature controller is recommended.

  • For high temperature, high wattage applications
  • Operational temperature range up to 800°C
  • Cord is spiralled around the tube being heated to give a surface loading power concentration up to 6.5W/cm²
  • Linear Loading: 328W/m (100W/ft)
  • Available in different lengths from 1 foot (30.5cm) to 16 feet (488cm)
  • Insulated unheated flexible lead at each end (61cm)
  • Approximate outside diameter of 5mm
  • For use in dry conditions only
  • outside diameter approx. 5mm

Availability: IN STOCK
SKU# HC505

488cm, 230V, 1600W

Electrothermal Quartz Fibre Heating Cords are ideal for indoor use for dry metal and glassware applications which require observation; they are especially suited to high temperature, high wattage applications.

Electrothermal HC5 Quartz Fibre Cords have a nickel/chrome heating element wound on a quartz finbre core which is covered in a braided quartz fibre outer sheath. They are available in different lengths to accommodate a broad range of temperatures up to 800°C. As with all the tapes and cords, the use of an energy or temperature controller is recommended.

  • For high temperature, high wattage applications
  • Operational temperature range up to 800°C
  • Cord is spiralled around the tube being heated to give a surface loading power concentration up to 6.5W/cm²
  • Linear Loading: 328W/m (100W/ft)
  • Available in different lengths from 1 foot (30.5cm) to 16 feet (488cm)
  • Insulated unheated flexible lead at each end (61cm)
  • Approximate outside diameter of 5mm
  • For use in dry conditions only
  • outside diameter approx. 5mm

Availability: IN STOCK