* At an ambient of 20oC, using a mixture of 40% water, 40% antifreeze and 20% ethanol

* At an ambient of 20oC, using a mixture of 40% water, 40% antifreeze and 20% ethanol

Technical Specification

* At an ambient of 20oC, using a mixture of 40% water, 40% antifreeze and 20% ethanol

Technical Specification

* At an ambient of 20oC, using a mixture of 40% water, 40% antifreeze and 20% ethanol

Technical Specification

* At an ambient of 20oC, using a mixture of 40% water, 40% antifreeze and 20% ethanol

Technical Specification

* At an ambient of 20oC, using a mixture of 40% water, 40% antifreeze and 20% ethanol

The Techne® liquid calibration bath (LCB) series offer compact, accurate and reliable liquid water baths which can be used for external circulation or temperature calibration of thermal sensors.

• -35°C to 250°C
• Three different capacities available; 5, 7 or 12 litres
• Temperature stability; ±0.005°C depending on choice of control unit
• Fully insulated bath for excellent heat retention
• Analogue or digital temperature selection, depending on choice of control unit
• Includes cover, lid and bridging plate

When temperature calibration is required the compact liquid baths offer excellent stability over the entire temperature range. The LCBs can be also be used for external circulation to maintain temperatures of samples in viscometers, photometers, refractometers, fermenters and other reaction vessels.

All models of LCB offer high pump performance and exceptional thermal stability from -35°C to 250°C. The water baths are fully insulated on all sides and base and are fitted with a cooling coil for connection to a cold water supply for use at temperatures around ambient. 
The minimum temperature achievable is -35°C when a Flow Cooler is added to the system.*

Each bath is supplied complete with lid, drain tap, carry handles, a cooling coil (with bung) and hole to position a certified sensor. The TechneWorks software package is available for the TU-20 thermoregulators free of charge.

* At an ambient of 20 ^oC, using a mixture of 40% water, 40% antifreeze and 20% ethanol
* LCB baths fitted with a TU-20HT thermoregulator are not suitable for use with a Flow Cooler

Please note: for Liquid Calibration Baths to operate, a thermoregulator is required. The thermoregulator must be purchased separately because there are 4 models to choose from.

The Techne® liquid calibration bath (LCB) series offer compact, accurate and reliable liquid water baths which can be used for external circulation or temperature calibration of thermal sensors.

• -35°C to 250°C
• Three different capacities available; 5, 7 or 12 litres
• Temperature stability; ±0.005°C depending on choice of control unit
• Fully insulated bath for excellent heat retention
• Analogue or digital temperature selection, depending on choice of control unit
• Includes cover, lid and bridging plate

When temperature calibration is required the compact liquid baths offer excellent stability over the entire temperature range. The LCBs can be also be used for external circulation to maintain temperatures of samples in viscometers, photometers, refractometers, fermenters and other reaction vessels.

All models of LCB offer high pump performance and exceptional thermal stability from -35°C to 250°C. The water baths are fully insulated on all sides and base and are fitted with a cooling coil for connection to a cold water supply for use at temperatures around ambient.
The minimum temperature achievable is -35°C when a Flow Cooler is added to the system.

Each bath is supplied complete with lid, drain tap, carry handles, a cooling coil (with bung) and hole to position a certified sensor. The TechneWorks software package is available for the TU-20 thermoregulators free of charge.

* At an ambient of 20 ^oC, using a mixture of 40% water, 40% antifreeze and 20% ethanol
* LCB baths fitted with a TU-20HT thermoregulator are not suitable for use with a Flow Cooler

Please note: for Liquid Calibration Baths to operate, a thermoregulator is required. The thermoregulator must be purchased separately because there are 4 models to choose from.

The Techne® liquid calibration bath (LCB) series offer compact, accurate and reliable liquid water baths which can be used for external circulation or temperature calibration of thermal sensors.

• -35°C to 250°C
• Three different capacities available; 5, 7 or 12 litres
• Temperature stability; ±0.005°C depending on choice of control unit
• Fully insulated bath for excellent heat retention
• Analogue or digital temperature selection, depending on choice of control unit
• Includes cover, lid and bridging plate

When temperature calibration is required the compact liquid baths offer excellent stability over the entire temperature range. The LCBs can be also be used for external circulation to maintain temperatures of samples in viscometers, photometers, refractometers, fermenters and other reaction vessels.

All models of LCB offer high pump performance and exceptional thermal stability from -35°C to 250°C. The water baths are fully insulated on all sides and base and are fitted with a cooling coil for connection to a cold water supply for use at temperatures around ambient. 
The minimum temperature achievable is -35°C when a Flow Cooler is added to the system.*

Each bath is supplied complete with lid, drain tap, carry handles, a cooling coil (with bung) and hole to position a certified sensor. The TechneWorks software package is available for the TU-20 thermoregulators free of charge.

* At an ambient of 20 ^oC, using a mixture of 40% water, 40% antifreeze and 20% ethanol
* LCB baths fitted with a TU-20HT thermoregulator are not suitable for use with a Flow Cooler

Please note: for Liquid Calibration Baths to operate, a thermoregulator is required. The thermoregulator must be purchased separately because there are 4 models to choose from.

Techne refrigerated baths offer a completely integrated refrigerated circulating system for open or closed applications, with a temperature range from -35°C to +100°C. Each bath is supplied with a lid and bridging plate. Temperature control is via one of the four Techne thermoregulators, providing a choice of 12 different bath and thermoregulator combinations.

Models
There are three bath capacities available: 
• 7 litre (RB-5A)
• 12 litre (RB-12A)
• 22 litre (RB-22A)

Features 
• Circulating bath with integrated refrigeration unit.
• Temperature range from -35°C to +100°C.
• Robust stainless-steel construction.
• Three models of refrigerated bath available: 7, 12, 22 litre.
• Four models of thermoregulators available (ordered seperately).
• 3 year warranty.

Technical Specification

¹ Internal coolant (not user accessible)
- RB-5A (-20 degrees C) mixture of 50% water, 50% antifreeze.
- RB-12A (-35 degrees C) mixture of 40% water, 40% antifreeze, 20% alcohol.
- RB-22A (-30 degrees C) mixture of 40% water, 40% antifreeze, 20% alcohol.

² Overall size with thermoregulator.

³ Add thermoregulator and bath shipping weight to get shipping weight of complete bath system.

Recommended bath liquid
- Techne low temperature bath oil

Techne ® invented the "Clip On" thermoregulator in 1948, and now offer four units. Thermoregulators are designed to be used with the Techne ® unheated water baths or any other suitable laboratory vessels. They will heat, circulate and safely control the temperature of the liquid in the bath within precise limits.

• A wider temperature range of –40°C* to 200°C
• Excellent temperature stability: ±0.005°C at 40°C
• 1.8kW heater power for fast heat up
• 4 digit setting with a bright LED digital temperature display
• This unit incorporates an RS232 connection
• User adjustable over-temperature cut-out
• Low liquid level cut-out as standard
  

Technical Specification 

 * Refrigeration or cooling coil required for below ambient cooling (see Techne Flow and Dip Coolers) 

Techne ® invented the "Clip On" thermoregulator in 1948, and now offer four units. Thermoregulators are designed to be used with the Techne ® unheated water baths or any other suitable laboratory vessels. They will heat, circulate and safely control the temperature of the liquid in the bath within precise limits.

• This sophisticated Tempunit ® covers a wide temperature range of -40°C* to 250°C
• Excellent temperature stability: ±0.005°C at 40°C
• 1.8kW heater power for fast heat up
• 4 digit setting with a bright LED digital temperature display
• RS232 connection supplied with TechneWorks software package and connecting lead as standard
• User adjustable over-temperature cut-out with an audible alarm fitted
• Low liquid level cut-out as standard

 Technical Specification

* Refrigeration or cooling coil required for below ambient cooling (see Techne Flow and Dip Coolers)

For temperatures up to 250°C we recommend the use of the LCB range of baths.

For temperatures up to 250°C we recommend the use of the LCB range of baths.

For temperatures up to 250°C we recommend the use of the LCB range of baths.

For temperatures up to 250°C we recommend the use of the LCB range of baths.

 For temperatures up to 250°C we recommend the use of the LCB range of baths.