019-922

BWB Model BWB-XP, 5 Channel Flame Photometer

Complete with: 5 simultanious detectors Na, K, Li, Ca, Ba, Gas Regulator, Air Compressor Inbuilt, Starter Pack and Fluids Kit "Just Add Gas", (100V·250V, 50/60Hz) Drain trap, connecting tubes, operating manual, PC software (with Interface cable) Including Starter Pack Containing : Fluid Kit: Diluent Concentrate (500ml), Decon 90 (150ml) Sodium Standard 10,000ppm (150ml) Potassium Standard 10,000ppm (150ml) Lithium Standard 10,000ppm (150ml) Calcium Standard 10,000ppm (150ml) Barium Standard 10,000ppm (150m
Ready to use straight out of the box!
 
General Purpose Flame Photometer!
 
The BWB XP is the first and only 5 channel flame photometerwith simultaneous detection and display of all 5 elements.
?
The BWB XP was designed from the ground up, using new, innovative and modern technology to give unsurpassed levels of accuracy, usability and reliability while significantly reducing analysis time. Our customers do not need to waste valuable time changing filters and re-calibrating when a different measurement is required, as is a common requirement in all other Flame Photometer designs from 1951 to the present. 
?
With clean lines and contemporary bright colour schemes, the XP looks exceptionally modern and will fit into any laboratory. The instrument has a large LCD display, which can be viewed easily from any angle.
?
Our metal casework provides a sturdy portable instrument and enables future recycling opportunities. ROHS compliant components and materials are used wherever possible.

The BWB Carbon Footprint is exceptionally low, in keeping with corporate objectives of being a responsible manufacturer.
?
Unlike other manufacturers who charge extra for vital accessories, BWB include everything required to use the product straight out of the box. Just add Gas!! (Propane, LPG or butane).
?
We also provide as standard, data sharing via USB from the BWB XP to your PC. This ties the output of the BWB Flame Emission Spectrometer (FES) to the Internet or your company intranet systems and facilitates Distributed Control which is vital for Multi-National companies, Universities and various Governmental agencies.
 

FEATURES

?

 

  • SIMULTANEOUS DETECTION AND DISPLAY OF ALL 5 ATOMS OF INTEREST 

 

  • INTUITIVE USER INTERFACE FOR TRUE EASE OF USE 

 

  • DISPLAY PROMPTS STEP BY STEP OPERATION 

 

  • BUILT-IN AIR COMPRESSOR 

 

  • SOLUTIONS AND LABWARE INCLUDED 

 

  • DATA SHARING VIA PC LINK VIA USB
     

  • OPERATOR INDEPENDENT DETERMINATION OF RESULTS 

?

  • 5 USER SELECTABLE UNITS OF MEASURE 

 

  • USER SELECTABLE DECIMAL PLACES 

 

  • INTEGRATED PRINTER OPTION USES READILY AVAILABLE PAPER 

 

  • IQ, OQ, PQ WEB-BASED CERTIFICATION AVAILABLE: IQ OQ PQ is completely unique in the analytical instrumentation arena. Available in English, Russian, German, Mandarin, French and Spanish.More languages in development

?

  • CORRECTION OF CA FOR THE INTERFERENCE FROM HIGH LEVELS
    OF NA
     

     

     

Technical Data

Sample rate 
3.5 – 7ml/min
?
Tubing materials 
Silicone and Tygon®  
?
Required desk space for Instrument  
50cm (H) x 45cm (W) x 45cm (D)*
For Safety reasons the Flame photometer requires 1m of unobstructed space above to allow dissipation of heat from the chimney.
?
Instrument size 
XP Flame Photometer
51cm (H) x 38cm (W) x 41cm (D)
(20in x 14in x 16in)
?
Shipping
62cm (H) x 55cm (W) x 47cm (D)
(24in x 22in x 19in)
?
Weight 
XP Flame Photometer – 15.3kg (33.7lbs)
Shipping – 25kg (55.1 lbs)
?
Optimal range
Single point calibration
Na 0.1 – 60ppm 
K 0.05 – 100ppm 
Li 0.05 – 50ppm 
Ca 1.0 – 100ppm 
Ba 1.6 – 100ppm
?
Multi Point Calibration
Na 0.1 – 1000ppm 
K 0.05 – 1000ppm 
Li 0.05 – 1000ppm 
Ca 1.0 – 1000ppm 
Ba 5.0 – 3000ppm 
?
Reproducibility 
<1% Coefficient of variability for 20 consecutive samples over ten minutes at concentrations of 100ppm or less. (After instrument stabilisation). 
Specificity 
Na/K/Li = <0.5% to each other when equal in concentration at <100ppm
?
Limit of detection (LOD) and
limit of quantification (LOQ) 
LOD                     LOQ        
Na – 0.03ppm    Na – 0.1ppm
K – 0.02ppm      K – 0.05ppm
Li – 0.02ppm     Li – 0.05ppm
Ca – 0.3ppm      Ca – 1ppm
Ba – 1.6ppm      Ba – 5.0ppm
?
Time to stability 
Less than 15 seconds after sample is introduced into the flame.
?
Ions measured  
Simultaneous measurement of Na, K, Li, Ca, Ba
?
Interfaces  
USB
0-2.5 volt output (based on sample concentration linked to element of users choice)
Optional 4-20mA output in place of the above
Optional integrated printer

.csv and .pdf generated reports and files via FP-PC software 

Recommended minimum warm up time based on ambient temperature  
21ºC – 40 minutes     
?
Power requirements   
100V – 250V AC at 50 or 60Hz automatically selecting 
?
Fuel requirement    
Propane, Butane or Natural Gas* regulated to 19Bar. Flow rate of 0.4l/min
*with modifications. BWB Technologies recommends either Propane or Butane for optimum results.
?
Readout  LCD, four line, alpha numeric, back lit.
 
 

WHAT’S IN THE BOX

 

  • PC Leads USB and RS232

  • Selection of 3 Power cables to suit all regions (4th option for China)

  • Gas Hose

  • Aspiration Kit

  • Manuals covering all aspects
    of the XP FP 

  • Quick Start guides 

  • Warranty Registration Form 

  • Certificates of analysis for all
    provided Fluids 

  • Material Safety Data Sheets for all provided Fluids 

  • The FP-PC Software installation USB 

  • 1L of BWB recommended
    cleaning solution 

  • 150ml calibration fluids for all 5 elements at 10,000ppm.

  • 100ml conical flask with screw lid

  • 100 disposable sample cups 

  • 1L of De-Ionised water

  • 2m of waste tube

  • Set of spare fuses

  • 10 x 10ml pipettes 

  • 10 x 1ml pipettes